Victron Energy Meter VM-3P75CT Single + 3-Phase

Energy Meter VM-3P75CT Single + 3-Phase

The Victron VM-3P75CT energy meter is a standard device to measure the power and energy of single- and three-phase applications and calculates each phase's power values and broadcasts this over VE.Can or Ethernet with a high rate.  It has built-in Ethernet and VE.Can ports for connecting to a GX device and the split-core current transformers enable easy and quick installation without modifying existing wiring.

The energy meter works out of the box (the firmware may need to be updated; details can be found in the Firmware Updates chapter) as a grid meter for systems with a MultiPlus and Quattro. Configuration (via VictronConnect) is only required for changing the role and manual IP configuration rather than the default DHCP.  Its data is displayed on a GX device such as the Cerbo GX or Ekrano GX, as well as in VictronConnect and the VRM Portal.

Specifications:

• Voltage connection: Direct


• Input voltage range L-N: 85 to 265VAC


• Input voltage range L-L;150 to 460VAC


• Frequency: 50/60Hz


• Current connection: Via current transformers (included - wire length 640mm (25.2in)


• Rated current: 75A


• VE.Can communication port: Two RJ45 connectors (VE.Can terminators included)


• Ethernet communication port: One RJ45 connector, Modbus UDP


• Refresh rate: 100ms


• Type: Self-power supply via L1-N


• Switch or circuit breaker: Required as means of a disconnecting device - not included


• External fuse [1]: Required in the neutral conductor - 500mA, not included


• Consumption: 1.45W / 3.1VA


• Frequency: 50/60Hz


• Material & Color: Polycarbonate, blue (RAL5012)


• Voltage connection: Screw terminals 0.25 - 1.5mm2 (24 - 16AWG)


• Current transformer connection: Pluggable screw terminals (included)


• Protection category: IP20


• Weight: 370g (including packaging)


• Dimensions: 90 x 71 x 59mm (3.5 x 2.8 x 2.3in)


• Indoor/outdoor usage: Indoor only


• Operating temperature: From -10 to +55 °C


• Storage temperature: From -20 to +70 °C


• Relative humidity: < 90% non-condensing


• Altitude: 2000m (6562ft)


• Mains supply voltage fluctuations: ±0.1Vin


• Overvoltage category: Cat. III


• Pollution degree: 2

What's In The Box?

• Victron VM-3P75CT with 3 input terminal blocks


• 3x Split-core current transformer, wired ready for connection


• Wire length: 640mm (25.3")


• VE.Can terminators (2-pieces)